Configuring The Exp/Midi Jack - Strymon Zelzah User Manual

Zelzah
- Multidimentional Phaser
Power Up Modes – Configuring the EXP/MIDI Jack
Set the functionality of the EXP/MIDI jack.
Press and hold the ON (4-Stage) footswitch while powering up the
1
pedal. Once both LEDs flash, release the footswitch.
Turn the SPEED (6-STAGE) knob to select the function of the EXP/
2
MIDI jack. ON (6-STAGE) LED will change color to indicate the
current status as the knob is turned.
Expression Pedal mode:
control over any of the knobs in any direction with a standard TRS
expression pedal. (See
Favorite mode:
using a Strymon MiniSwitch. (See
Tap mode:
phaser with TAP tempo using a Strymon MiniSwitch.
MIDI mode:
using a Strymon MultiSwitch Plus. Full MIDI functionality is
available by sending MIDI Program Change messages via 1/4"
MIDI connection using a Strymon Conduit or MIDI EXP cable. Up
to 300 presets are available via MIDI.
(See page 22
SWEEP
classic
barber
env
SPEED
MIX
DEPTH
multidimensional phaser
GREEN
page 17
AMBER - Allows you to recall a Favorite setting
RED - Allows you to control the SPEED of the 6-Stage
BLUE - Allows for the selection of three presets
for MultiSwitch Plus or
RESONANCE
o
mild
strong
SPEED
phase time
VOICE
DEPTH
(default) - Allows continuous
for details.)
page 19 for details.)
page 23 for MIDI.)
pg 15