Configuring The Exp/Midi Jack - Strymon DIG User Manual

DIG
- dual digital delay
Power Up Modes

Configuring the EXP/MIDI Jack

1 Press and hold the TAP footswitch while powering up DIG� Once both
LEDs flash, release the footswitch�
2 Turn the MIX
panel's EXP/MIDI jack� The ON LED will change color to indicate the
current status as you turn the knob�
• Expression Pedal mode:
control over any of the knobs in any direction with a standard TRS
expression pedal� (See
• Favorite mode:
using a Strymon MiniSwitch� (See
• Tap mode:
tempo using a Strymon MiniSwitch� (See
• MIDI mode:
a Strymon MultiSwitch Plus� Full MIDI functionality is also avail-
able by sending MIDI Program Change messages via 1/4" TRS
MIDI connection using a Strymon Conduit or MIDI EXP cable� Up to
300 presets are available via MIDI� (See
Plus" on page 26
(EXP/MIDI JACK) knob to select the function of the rear
GREEN
page 22
AMBER - Allows you to recall a Favorite setting
RED
- Allows you to set the master delay time via tap
BLUE
- Allows for the selection of three presets using
or "Saving Presets in MIDI Mode" on page
(default) - Allows continuous
for details�)
page 23 for details�)
page 25
"Configuring MultiSwitch
for details�)
33�)
pg 20