Midi - Specifications - Strymon Riverside User Manual

Riverside
- Multistage Drive
®
MIDI – Specifications
MIDI Patch Changes
Riverside contains 300 preset locations, numbered sequentially from
0-299. Because MIDI Program Change messages have a maximum
number of 128 (0-127) the presets are grouped into three MIDI patch
banks.
- MIDI BANK 0 = PRESETS 0-127
- MIDI BANK 1 = PRESETS 128-255
- MIDI BANK 2 = PRESETS 256-299
Riverside always powers up in MIDI Patch Bank 0, so if you plan to
stay within the first 127 presets, simply send a standard MIDI Program
Change message to load a preset.
If you will be using MIDI Banks 1 and/or 2, it is advisable to send a
standard MIDI Bank Change message "MIDI CC# 0 with a value equal
to the MIDI Bank#" before each MIDI Program Change.
Selecting bank 0, patch 127 will put Riverside into Manual mode. In this
mode, the pedal will be set to the current knob and switch settings. No
preset data can be stored at this preset location.
pg 34