Configuring The Exp/Midi Jack - Strymon DECO User Manual

Deco
- tape saturation & doubletracker
Power Up Modes

Configuring the EXP/MIDI Jack

1 Press and hold the TAPE SATURATION ON footswitch while power-
ing up Deco� Once both LEDs flash, release the footswitch�
2 Turn the LAG TIME
the rear panel's EXP/MIDI jack� The DOUBLETRACKER ON LED will
change color to indicate the current status as you turn the knob�
• Expression Pedal mode:
control over any of the knobs in any direction with a standard TRS
expression pedal� (See
• Favorite mode:
using a Strymon MiniSwitch� (See
• Tap mode:
using a Strymon MiniSwitch� (See
• MIDI mode:
a Strymon MultiSwitch Plus� Full MIDI functionality is also avail-
able by sending MIDI Program Change messages via 1/4" TRS
MIDI connection using a Strymon Conduit or MIDI EXP cable� Up
to 300 presets are available via MIDI� (See
Plus" on page 25
(EXP/MIDI
GREEN
page 21
AMBER - Allows you to recall a Favorite setting
RED - Allows you to set the LAG TIME via tap tempo
BLUE
- Allows for the selection of three presets using
or "Saving Presets in MIDI Mode" on page
JACK) knob to select the function of
(default) - Allows continuous
for details�)
page 22 for details�)
page 24 for details�)
"Configuring MultiSwitch
32�)
pg 19