Configuring The Exp/Midi Jack - Strymon Lex rotary User Manual

Lex
- rotary
Power Up Modes

Configuring the EXP/MIDI Jack

1 Press and hold the SLOW/FAST footswitch while powering up Lex�
Once both LEDs flash, release the footswitch�
2 Turn the VOLUME
rear panel's EXP/MIDI jack� The ON LED will change color to indicate
the current status as you turn the knob�
• Expression Pedal mode:
control over any of the knobs in any direction with a standard TRS
expression pedal� (See
• External Speed Switch mode:
between fast and slow rotor speeds with a Strymon MiniSwitch�
(See page 16
• Favorite mode:
using a Strymon MiniSwitch� (See
• Tap mode:
a Strymon MiniSwitch� (See
• MIDI mode:
a Strymon MultiSwitch Plus� Full MIDI functionality is available by
sending MIDI Program Change messages via 1/4" MIDI connection
using a Strymon Conduit or MIDI EXP cable� Up to 300 presets are
available via MIDI� (See
20 or "Saving Presets in MIDI Mode" on page
(EXP/MIDI JACK) knob to select the function of the
GREEN
page 15
for details�)
AMBER
- Allows you to recall a Favorite setting
RED - Allows you to control Lex's SPEED option using
BLUE - Allows for the selection of three presets using
"Configuring MultiSwitch Plus" on page
(default) - Allows continuous
for details�)
PURPLE
- Allows you to toggle
page 17 for details�)
page 19 for details�)
27�)
pg 13