Features; Harness And Headrest Adjuster; Buckle - Britax ONE4LIFE CLICKTIGHT User Manual

3 in
Acceptable Acceptable
REAR-Facing FORWARD-Facing
Harness Mode Harness Mode

Features

Harness and Headrest Adjuster

The headrest and the harness heights adjust together.
Adjusting Headrest and Harness Positions
1. Squeeze the harness and
headrest adjuster at the top
of the headrest and raise or
lower it into desired position.
2. Ensure the headrest has locked
into position.

Buckle

There are three different buckle
position slots. Adjust the buckle
to the position closest to but not
under the child. Never leave the
buckle in the adjustment slot.
NOTE: If your child eats
and drinks while in the child
restraint, check the buckle
periodically and clean out
any accumulated debris
(see page 49).
Adjusting the Buckle Position
1. Unbuckle the harness.
12
Table of Contents
3 in
Not Acceptable
Overhang
BOOSTER Mode
INNER SLOT
MIDDLE SLOT
OUTER SLOT
2. Open the CLICKTIGHT.
Squeeze the CLICKTIGHT
release buttons
underneath the front cover
flap and lift to open.
3. Lift the front of the seat
cover off the CLICKTIGHT.
4. Locate the metal bracket
on the underside of the
CLICKTIGHT.
5. Turn the metal bracket
sideways and push it up
through the slot in the
CLICKTIGHT and the slot
in the seat cover.
6. Route the buckle strap
through the desired
seat cover and slots,
reaching on the other
side of the open to pull
the metal bracket through
completely.
7. Pull gently on the buckle
to sit the metal bracket
flat.
8. Replace the front of the
seat cover.
Table of Contents
OUTER SLOT
MIDDLE SLOT
INNER SLOT
13