Manual Message Waiting (Mmw) - Mitel 7433 User Manual

M 7433 IP P
ITEL HONE FOR
9.1.3
9.2
9.2.1
59
M V MX-ONE
I OICE
1. Press Yes.
2. Enter the VoiceMail number.
If you do not know the number to the VoiceMail, please contact the system
administrator.
3. Press Done.
PROGRAMMING MY MESSAGES NUMBER
If your phone can be connected to an additional message server, you can program the
number of this server to My Messages.
To program a number for My Messages, do the following:
1. Press .
2. Select My Messages, and press Call.
3. If the following message is displayed, the voice mail number should be config-
ured to Call: "Not programmed! Program Messages?"
4. Press Yes.
5. Enter the number to the message server
If you do not know the number to the message server, contact the system admin-
istrator.
6. Press Done.

MANUAL MESSAGE WAITING (MMW)

The Manual Message Waiting (MMW) feature enables you to send and receive
message waiting signals when the line is busy.
• MMW allows you to send a message waiting signal to an extension that does not
answer when you call (if this feature is allowed, this is set by the system admin-
istrator).
• MMW allows you to receive a message waiting signal from someone who has
tried to contact you.
CALLING THE PARTY THAT REQUESTED MMW
If there is a message waiting for you, "Messages" appears in the display, and the indi-
cator corresponding to
person, do the following:
1. Press .
New from [number or contact that left MMW] is selected.
2. Press Call.
The person who left the MMW is called.
or
1. Lift the handset and wait for the dial tone.
is flashing. To check who left the MMW, and to call this
6/1553-DBC 433 01 Uen G 2016-03-08