Table of Contents
Advertisement
12.6
12.7
12.7.1
12.8
6/1553-DBC 433 01 Uen G 2016-03-08
OPTION UNIT
To modify the option unit settings, do the following:
1.
Press
.
2.
Select Option Unit, and press Select.
Note: Option Unit is available only when an option unit is installed.
3.
Select Busy signal, Extra bell, or Combined Bell/Busy, and press Select.
In section 1.10 Option Unit on page 18, you will find the detailed information about the
option unit and how to install it.
SECURITY AND ACCESS
It is possible to view and change the PIN code, if this option has been configured by
system administrator.
CHANGING PIN CODE
You can change the PIN code used for logging on to the telephony system.
Note: Depending on the phone configuration, the menu option Changing PIN may not
be available.
To change the PIN code, do the following:
1.
Press
.
2.
Select Security and Access, and press Select.
3.
Select Change PIN and press Select.
4.
Enter the current PIN code, and press OK.
You will be prompted for a new PIN (1-7 digits).
5.
Enter your new code, and press OK.
Note: Only digits can be used as PIN.
6.
Enter the new code again for confirmation, and press OK.
HELP
You can easily get information on which software version is installed on your phone,
the phone IP address, and the phone web address.
To find this information, do the following:
1.
Press
.
2.
Scroll to Help, and press Select.
About Mitel 7433 is displayed.
3.
Press Select.
Software version is displayed.
4.
Select Phone IP Address and press Select to see the IP address.
S
ETTINGS
78
Advertisement
Table of Contents
