Table of Contents
Advertisement
4.2.1.5
4.2.2
4.2.2.1
4.2.2.2
6/1553-DBC 433 01 Uen G 2016-03-08
A confirmation message is displayed.
4)
Press Yes to confirm, or No to cancel.
5)
Replace the handset.
Note: This procedure cancels callbacks to internal numbers and busy external lines.
Canceling a Single Callback
To cancel a single callback, do the following:
1)
Lift the handset and wait for a dial tone.
2)
Dial # 37 * internal number #.
3)
Replace the handset.
Note: To cancel a single callback on an external line, enter the digit or digits required
for a line, rather than the internal number.
CALL WAITING
If you urgently wish to contact a busy extension, you can send a notification using a
Call Waiting signal. Call Waiting is indicated either by a tone (if the busy extension is
an analog), or as a second call (if the busy extension is a digital system phone or an IP
phone).
Note: If the called extension does not accept Call Waiting signals, you will continue to
hear a busy tone. If the busy extension ignores the Call Waiting function key, you
can order automatic Callback, see 4.2.1 Callback on page 30.
Activating Call Waiting
To send a call waiting signal to the busy number, do the following:
1.
Press more....
2.
Select CallWaiting, and press Select.
3.
Keep handset off hook. If the called party answers your call waiting request, the
call will be established. If the called party does not want to answer your call, you
will continue to hear the ring tone until you go on hook.
Answering a Call Waiting Call
When you get a call waiting indication (call waiting tone or ring signal and
flashing), there are the following possibilities:
1.
Park the ongoing call.
2.
End the ongoing call.
3.
Reject the call waiting request.
If you want to park the ongoing call, do the following to answer the call waiting call:
1.
When the ongoing call is on
call.
2.
Press the
key. The call on
and the
flashes to indicate the call waiting
is automatically parked.
O
C
UTGOING
ALLS
is
32
Advertisement
Table of Contents
