Receiving Message Waiting Indications - Mitel MiVOICE OFFICE 250 User Manual

Note: If you enter the handoff feature code (388) and the display shows NO CALL TO
HANDOFF, the call cannot be handed off (see
S
If your phone has a button programmed for the Handoff feature, then the button will
light if there is a call available to pull.
To cancel the Dynamic Extension Express – Handoff feature:
While the handoff is in-progress, press
appears on the display for your main extension.

Receiving Message Waiting Indications

If your main extension receives a message waiting indication (MWI) from voice mail or the
system's station messaging feature, the MWI is propagated (as applicable) to your other internal
associated destinations. If any of your internal associated destinations responds to the MWI,
then the MWI is cleared on all of them. Note that if any destination other than your main extension
receives an MWI, it will not propagate to the other internal destinations. The MWI has to originate
on your main extension.
If enabled, the system can send a text message to your mobile phone to indicate that your main
system extension has received a new station message or voice mail message.
Here is an example of an e-mail message generated by a station message:
You have a message from <Username> at extension <Extension>.
Callback: <Auto Attendant Number>
Here is an example of an e-mail message generated by a voice mail message:
You have a new voice mail message for mailbox number <Mailbox Number>.
Callback: <Voice Mail Notification and Retrieval Number>
You can use the callback number to easily call back into the system and speak to the messaging
party or retrieve your voice mail message. Check with your administrator if you would like to
take advantage of this feature.
page 113).
(Special), and then dial 388. HANDOFF CANCELLED
Call Features
63