Message Waiting Indicator; Configuring Message Waiting Indicator; Incoming Intercom Call Features - Mitel 6865i User Manual

ADDITIONAL FEATURES

MESSAGE WAITING INDICATOR

You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines. For
example, if you configure the MWI LED on Line 2 only, the LED illuminates if a voicemail is pending on
Line 2. If you configure the MWI LED for all lines, the LED illuminates if a voicemail is pending on any line
on the phone (lines 1 through 24).
You configure the MWI using the Mitel Web UI.

CONFIGURING MESSAGE WAITING INDICATOR

MITEL WEB UI
Click on Basic Settings > Preferences > General.
1.
The Message Waiting Indicator Line field is set to all lines by default. If required, change the setting
2.
to a specific line by selecting a line from the list. Valid values are All and lines 1 through 24.
Click Save Settings.
3.

INCOMING INTERCOM CALL FEATURES

By default, the IP phone allows incoming intercom calls to be automatically answered without having to
set up an Icom key on your phone. The phone automatically plays a warning tone when it receives an
MESSAGE WAITING INDICATOR
159