Incoming Calls - Mitel 7433 User Manual

M 7433 IP P
ITEL HONE FOR
3
3.1
3.1.1
3.1.2
3.2
3.3
27
M V MX-ONE
I OICE

INCOMING CALLS

This chapter describes how to answer and reject incoming calls, how to pick up calls
on other extensions, and how to check missed calls.
RECEIVING CALLS
An incoming call is indicated by a ring signal, and a flashing indicator associated with
the line on which the call is presented. The phone display shows the number of the
caller (or the name, if the calling number is one of your contacts).
Note: If the feature parallel ringing is activated, the call will ring on more than one
phone, see 3.6 Parallel Ringing on page 29.
ANSWERING A CALL
You can answer incoming calls in handset mode or handsfree mode:
• Handset: Lift the handset. The call is received on
• Handsfree: Press the flashing line button without lifting the handset. (You can
then switch to the handset by lifting the handset.)
REJECTING A CALL
If you are busy and prefer not to answer a specific incoming call, you can reject it by
pressing either
disconnected.
PICKING UP CALLS
You can answer calls to your extension from another phone, as well as answer calls to
another extension from your phone. This feature is known as picking up calls.
To pick up a call, do the following:
1. Lift the handset and call the ringing extension.
2. Call the ringing extension.
3. When you get a busy tone, press 8.
Note: France and New Zealand, press 4; Sweden, press 6.
Note: Some phones can be protected against call pick-up.
MISSED CALLS
If you have new missed calls in the call list, the call list key
To check your missed calls, do the following:
1. Press the
or Reject. The caller will then hear a busy tone, and the call is
key to enter the call list.
6/1553-DBC 433 01 Uen G 2016-03-08
.
indicator flashes.