Table of Contents
Advertisement
12.2.2
12.2.2.1
12.3
6/1553-DBC 433 01 Uen G 2016-03-08
To download a melody from a specified server, do the following:
1.
Press
.
2.
Select Sounds and press Select.
3.
Select Ring Signals and press Select.
Default Ring Signals is selected.
4.
Press Select.
5.
Navigate to Melody 1 (empty) and press Add.
A list of all available melodies is displayed.
6.
Select a melody and press Select.
Note: If you wish to listen to a signal or melody before selecting it, press
more... and then Play. When you are done listening to a signal, press Stop.
ALERT TYPE
With the Mitel 7433 phone, it is possible to change the way the phone rings for incoming
calls (1st call and 2nd or 3rd call), and for monitored extensions.
The following alerting types are available:
Visual only
The signal is muted, but the indicator on the line key where the call is received is
flashing.
Periodic
The ring signal alerts periodically.
Delayed Periodic
There is a delay before the first ring signal. The length of the delay can be
changed by the system administrator.
One muted
The phone rings once, then the signal is muted.
Delayed one muted
There is a delay before the ring signal. After one ring, the signal is muted. The
length of the delay can be changed by the system administrator.
Changing Alert For Incoming Calls
To change the alert signal for incoming calls, do the following:
1.
Press
.
2.
Select Sounds and press Select.
3.
Select Alert and press Select.
4.
Select Alert 1st call or Alert 2nd or 3rd call, and press Select.
5.
Select an alert, and then press Set.
DISPLAY
This section describes how to change the display contrast.
S
ETTINGS
74
Advertisement
Table of Contents
