Mitel 7433 User Manual page 31

For mivoice mx-one
Hide thumbs Also See for 7433:
Table of Contents

Advertisement

M
7433 IP P
ITEL
HONE FOR
4.2.1.1
4.2.1.2
4.2.1.3
4.2.1.4
31
M
V
MX-ONE
I
OICE
Ordering Callback
To order callback, do the following:
1)
Press Callback.
It takes a few seconds before the procedure is executed. 
A confirmation message is displayed.
2)
Replace the handset to finish the procedure.
You are called back (callback reminder) when the ongoing call is finished or the
next time a new call is finished.
Ordering Callback When All External Lines Are Busy
If all external lines are busy (after dialing the digit or digits to get an external line), do
the following:
1.
Press Callback.
Wait for dial tone.
2.
Dial the external number (or part of the number, or no number) and press #.
You can have a callback on the external line, that is, you will be notified
when the external line is free without specifying the external number to call.
You can enter a number that will be dialed automatically when you answer
the callback call.
You can enter part of the number, and dial the remaining digits when you
answer the callback call.
3.
Replace the handset.
Answering Callback
As soon as an internal number, or an external line, becomes free, you will be called
back.
To answer a callback call, do the following:
1.
Lift the handset. You will hear the ring tone.
You have to answer within 8 seconds, otherwise the callback is cancelled.
Note: If you have ordered callback for an external line, you may be prompted
to enter any remaining digits.
2.
The system calls the number you have requested for callback.
Canceling All Callbacks
To cancel all callbacks, do the following:
1)
Lift the handset and wait for a dial tone.
2)
Press more....
3)
Select Cancel all Callbacks, and press Select.
6/1553-DBC 433 01 Uen G 2016-03-08

Advertisement

Table of Contents
loading

Table of Contents