Logging Off The Phone; Restarting The Phone - Mitel 7433 User Manual

For mivoice mx-one
Hide thumbs Also See for 7433:
Table of Contents

Advertisement

2.2.2
2.2.3
2.3
2.4
6/1553-DBC 433 01 Uen G 2016-03-08
PERMANENT USER
The idle screen mode is displayed, and the phone is ready to use.
Note: It is not possible to log off a phone that has been set to this mode.
TEMPORARY USER
The phone is logged on with a default number, but you can log on with your individual
number and get your user profile.
To log on with your personal extension number, do the following:
1.
Press more..., select Log On Temporary User, and press Select.
2.
Enter the extension number for the temporary user, and press Log On.
3.
If password (or PIN code) is required, enter the password (or PIN code) and
press Log On again.
Note: All temporary users will be logged off from the phones during the night, at 03:00
(default).

LOGGING OFF THE PHONE

If logging off the phone is allowed, the option Log off: [logged on user] appears when
you press more....
To log off from the phone, do the following:
1.
Press more... when the phone is in idle state.
2.
Select Log off: [logged on user] and press Select.
The following messaged is displayed: "Log off? [logged on user]"
3.
Press Yes to confirm.
Press No to cancel.
If the logged off user was a temporary user, the preliminary user is logged
back on automatically.
If no user is logged on, only emergency calls are possible.
Note: If the emergency call function is disabled, the message "No calls!" is displayed.
For more information on emergency calls, see 4.3 Emergency Calls (SOS Calls)
on page 34.

RESTARTING THE PHONE

If your phone does not work properly, you can restart it and restore the default headset
and handset volume settings.
To restore the default settings in the phone, do the following.
1.
Press and hold
2.
Select Restart the Phone.
A confirmation message is displayed.
.
S
P
TARTING THE
HONE
24

Advertisement

Table of Contents
loading

Table of Contents