Mitel 7433 User Manual page 23

For mivoice mx-one
Hide thumbs Also See for 7433:
Table of Contents

Advertisement

M
7433 IP P
ITEL
HONE FOR
2.2
2.2.1
23
M
V
MX-ONE
I
OICE
USER TYPE MODES
There are three user type modes:
Free User: You need to log on to the telephony system to be able to use the phone,
and you are allowed to log off the phone. This is the most common mode.
Permanent User: The phone is always logged on with a default number. You cannot
log on or log off. This mode can be used for phones in, for example, receptions.
Temporary User: The phone is always logged on with a default number, but you can
log on with your own extension number and get access to your user profile. This mode
can be used in a free seating environment.
Note: Viewing and changing user type modes require administrator rights.
FREE USER
When log off is allowed, the phone must be logged on (registered) to the telephony
system to be used. When the phone is logged off, the display will look like in the figure
below. If the emergency call function is enabled, it is possible to make emergency calls.
For more information on emergency calls, see 4.3 Emergency Calls (SOS Calls) on
page 34.
Figure 9:
Logon screen when log off is allowed
The last extension number used (by the previous user) remains until changed.
To log on with your own extension number, do the following:
1.
Enter your extension number. If it already appears in the display, skip to step 2.
The displayed number is erased automatically when you start entering new
digits. The display shows your entered digits.
2.
Press Log On.
3.
Depending on the configuration, you are logged on automatically, or prompted
for login details.
If a password (or PIN code) is not required, the phone logs on automati-
cally.
If a password (or PIN code) is required, enter your password (or PIN code)
and press Log On again.
4.
When your name and number appears in the display, the phone is ready to use.
Note: The password is obtained from, and can only be changed by, the system admin-
istrator. The PIN code (if used) can be changed by the user.
When a user is logged on and the phone is in idle state, the option Log Off: [logged on
user] appears when you press the soft key more.... To log off a user, see 2.3 Logging
Off the Phone on page 24.
6/1553-DBC 433 01 Uen G 2016-03-08

Advertisement

Table of Contents
loading

Table of Contents