Message Waiting Indicator; Configuring Message Waiting Indicator; Incoming Intercom Call Features - Mitel 6940 User Manual

Mitel 6940 SIP Phone User Guide
3. Click Save Settings to save your settings.

Message Waiting Indicator

You can configure the Message Waiting Indicator (MWI) to illuminate for a specific line or for all lines.
For example, if you configure the MWI LED on Line 2 only, the LED illuminates if a voicemail is
pending on Line 2. If you configure the MWI LED for all lines, the LED illuminates if a voicemail is
pending on any line on the phone (lines 1 through 24).
You configure the MWI using the Mitel Web UI.

Configuring Message Waiting Indicator

1. Click on Basic Settings > Preferences > General.
2. The Message Waiting Indicator Line field is set to ALL lines by default. If required, change
the setting to a specific line by selecting a line from the list. Valid values are All and lines 1
through 24.
3. Click Save Settings.

Incoming Intercom Call Features

By default, the IP phone allows incoming intercom calls to be automatically answered without having
to set up an Icom key on your phone. The phone automatically plays a warning tone when it receives
an incoming intercom call. It also mutes the microphone. If the intercom call comes into the phone
while an active call is already present, the phone puts the active call on hold and answers the
intercom call.
You can change the behavior of how the phone handles incoming intercom calls by
enabling/disabling the following parameters using the Mitel Web UI:
ccxiv