System Setup; Antenna Setup - Strong SRT 6500 User Manual

8.2.1 System Setup

Press the OK button on 'System Setup' in the Setup Menu. The following window will appear.
Set the Video Format, UHF Channel, TV Type, Scart RGB output, GMT Offset, Positioner, LNB Reference and Summer Time.
Use CH p/q to move up and down the list
n
Use Vol t/u to change the setting
n
Upon reaching the required menu line, press OK to enter the setting
n
Press EXIT to go back to the previous mode
n

8.2.2 Antenna Setup

Press OK on 'Antenna Setup' in the Setup Menu. The following window will appear.
Set the satellite, LNB Frequency, 22 kHz Tone, DiSEqC mode and LNB Power and Positioner setup.
Use CH p/q to move up and down the list
n
Use Vol t/u to change the setting
n
22 kHz Tone: On / Off / Auto - Make your selection depending from installed LNB
DiSEqC: Off / DiSEqC A, B. C or D / Tone A or B. If you have DiSEqC 1.0 or Tone Burst switch installed
LNB Power: H/V / 14 V / 18 V / Off
Positioner: None / DiSEqC 1.2 / USALS. If you use antenna mounted on the DiSEqC 1.2 positioner then select "DiSEqC 1.2". If your
positioner is USALS compatible then select "USALS"
12
Video Format: MULTI / PAL I, B, G or K / SECAM / NTSC
TV Type: Standard (4:3) / Wide (16:9) and aspect conversion
PAN SCAN/Letter boxScart
Scart RGB: On / Off
Positioner: Yes / No
Teletext type: STB / VBI
GMT Offset: +12:00 ~ -12:00
Summer Time: On / Off
SAT: Select satellite from the stored list. To include satellite to
the list of satellites available for Channel search you need to
select it with OK button. Selected satellites marked with
¸
symbol. If you want to rename selected satellite – press
Info button
Select between Universal / Wide Band / OSC C- Band /
LNB Type:
C-Band / Ku-Band / Unicable / Standard Sat. Make your
selection depending from installed LNB
High L.O.: Enter the frequency of Local Oscillator for High band. Refer
to your LNB manual
Low L.O.: Enter the frequency of Local Oscillator for Low band. Refer
to your LNB manual
PART 1 English
l