How To Program The Start And Stop Of The Oven; How To Cancel An Oven Start/Stop Program; Cooking Finished Mode - ROSIERES RDCV 49 MIN Instructions For Installation And Use Manual

HOW TO PROGRAM THE S TART AND STOP OF THE OVEN
Turn on the oven, select a cooking function and set the desired cooking temperature.
Use the keys
The maximum time that can be set is 10 hours.
Then press the key:
When the message SET TIME appears, use the keys
set the END OF COOKING time, within the next 23 hours 59 minutes.
Confirm the setting with the key
The oven will go into delayed start mode. It will be automat ically activated later for a set duration
and will stop at the programmed end of cooking time.
A clear message:
at 15 sec. intervals will be displayed to show the time remaining before the oven is turned on.
It is pos sible, however, to recall the information on the display at any time by pressing one of the
two keys
HOW TO CANCEL AN OVE N START/STOP PROGRAM
Press the keys
The oven will automatically activate and display the message:
MENU
COOKING FINISHED MOD E
The oven turns off all the heating elements.
The display shows the message:
The buzzer signal can be turned off by pressing any key.
Press the key
cooking cycle.
N.B. In steam cooking cycles, two minutes before the cooking time ends the steam discharge vent
opens in order to discharge as much steam as possible form the cooking chamber.
18
(3) to set the cooking time.
(9), select the item END OF COOKING with key
(8).
OVEN TO BE TURNED ON IN
(3)
(3) simultaneously to cancel the oven start/stop program.
COOKING FINISHED
to turn off the oven o r press one of the two keys
(3) to
.. ..
COOKING IN PROGRESS
accompanied by a buzzer signal.
(8).
(7) to select a new