How To Display Or Change The Alarm Status; How To Reset The Alarm Function; How To Program The Oven; How To Set Or Change The Cooking Time - ROSIERES RDCV 49 MIN Instructions For Installation And Use Manual

HOW TO DISPLAY OR CH ANGE THE ALARM STATU S
Press one of the two keys
regarding the time status of the alarm.
The symbol begins to flash.
Press one of the two keys

How to reset the alarm function

Press the keys
function.
The symbol will turn off.
HOW TO PROGRAM THE O VEN
HOW TO SET OR CHANGE THE COOKING T IME
Turn the oven on and select a cooking function.
Use the keys
The initial display of the time is set in mm.ss, then hh.mm.
(h=hours, m= minutes, s=seconds)
The maximum time that can be set is 10 hours.
Then activate the cooking, see section
The time displayed begins to decrease, and when it reaches zero the oven will go into cooking
finished mode, see on page 37.
HOW TO CANCEL A COOK ING TIME
Press the keys
function.
The cooking time is set to zero.
(4) and the display immediately shows the information
(4) to set a new time for the alarm.
(4) simultaneously to reset the time previously programmed for this
(3) to set the cooking time.
how to start the cooking
(3) simultaneously to cancel the time previously programmed for this
on page 16.
17