How To Change The Food Probe Temperature; Using The Food Probe As A Thermometer; How To Program The Start Of The Oven Using The Food Probe - ROSIERES RDCV 49 MIN Instructions For Installation And Use Manual

HOW TO CHANGE THE FO OD PROBE TEMPERATURE
Press one of the two keys
Maximum temperature that can be set:
Minimum temperature that can be set:
The food probe temperature value is displayed with the following graphic symbol to the left:
Notes:
The chamber temperature must be higher than the food probe temperature. Otherwise, the
display of the chamber temperature will flash to indicate an incorrect setting.
It is not possible to set a cooking time using the food probe or vice versa.

USING THE FOOD PROBE AS A THERMOMETER

Press the two keys
the instantaneous value measured by the probe.
The maximum and minimum temperature that can be measured is 250°C - 20°C.
HOW TO PROGRAM THE S TART OF THE OVEN USING THE FOOD PROBE
Connect the food probe to the appropriate connector (see fig. A, page 19). Turn on the oven,
select a cooking function and set the desired cooking temperature.
Then press the key:
When the message SET TIME appears, use the keys
the START COOKING time, within the next 23 hours 59 minutes.
Confirm the setting with the key
The oven will go into delayed start mode. It will activate automatically at the programmed time
and stop at the end of cooking, i.e., when the food temperature reaches the value set for the probe
temperature.
A clear message:
at 15 sec. intervals will be disp layed to show the time remaining before the oven is turned on.
It is possible, however, to recall the information on the display at any time by pressing one of the
two keys
20
(2) to change, with steps of
(2) simultaneously and the probe temperature display will show
(9) and select the item START COOKING with key
(8).
OVEN TO BE TURNED ON IN
(3)
+/-
90°C
30°C
(3) to set
.. ..
1°C, the food probe temperature.
(8).