Table of Contents
Advertisement
IP Camera User Manual
4.3.8 SNMP
To get camera status, parameters and alarm information and remotely manage the camera, the SNMP function can be used.
Before using SNMP, please install an SNMP management tool and set the parameters of SNMP, such as SNMP port, trap address.
1. Go to the SNMP section.
2. Select the corresponding version (SNMPv1/SNMPv2c or SNMPv3) according to the version of the SNMP software that will be used.
3. Set the values for "Read SNMP Community", "Write SNMP Community", "Trap Address", "Trap Port" and so on. Please make
sure the settings are the same as that of the SNMP software.
4.3.9 Port Setting
Set up the ports that are used to access different camera functions.
21
Advertisement
Table of Contents
