WARNING
Incorrect battery cable routing could
damage the machine and cables causing
sparks. Sparks can cause the battery
gasses to explode, resulting in personal
injury.
• Always disconnect the negative
(black) battery cable before
disconnecting the positive (red)
cable.
• Always connect the positive (red)
battery cable before connecting the
negative (black) cable.
WARNING
Connecting cables to the wrong post
could damage the electrical system and
result in personal injury.
Note:
Ensure that the battery cables are routed
away from any sharp edges or moving parts.
Product Overview
Controls
Become familiar with all the controls before you start
the engine and operate the machine
3
1. Ignition switch
2. Throttle lever
Motion Control Levers
The motion control levers control the forward and
rearward motions as well as the turning of the
machine. Refer to
Driving the Machine (page
Parking Brake Lever
Whenever the engine is shut off, engage the parking
brake to prevent accidental movement of the machine.
To engage the parking brake, pull the parking brake
lever rearward and up
parking brake, push the parking brake lever forward
and down.
13
(Figure
1
2
4
Figure 6
3. Power take off (PTO)
Switch
4. InfoCenter
(Figure
7). To release the
6).
g022099
g022099
21).