Advertisement
Installing the Center Brush
1.
Remove the 2 screws and the 2 locknuts near
the center of the rake center assembly as shown
in
Figure
5.
1. Screws (existing)
2.
Align the 2 mounting holes in the brush assembly
with the 2 mounting holes in the rake center
assembly
Figure
1. Screws (1/4 x 7/8 inch)
2. Locknuts (1/4 inch)
3.
Secure the brush assembly to the rake with 2
screws (1/4 x 7/8 inch) and 2 locknuts (1/4 inch);
refer to
Figure
6.
Figure 5
2. Locknuts (existing)
6.
Figure 6
3. Brush assembly
Product Overview
g024615
1. Weights (2 included—For Sand Pro 2040Z Only)
2. Right-hand brush assembly
3. Center brush assembly
4. Left-hand brush assembly
g024616
3
Figure 7
Figure 8
Installed brush kit
g024629
g024673
Advertisement
