Engine Maintenance; Checking The Air Cleaner - Toro Groundsmaster 7210 Operator's Manual

down the unit when it is still hot and avoid directing
high-pressure or high volume spray at the bearings
or seals.

Engine Maintenance

Checking the Air Cleaner

1. Check the air cleaner body for damage, which
could possibly cause an air leak. Replace a
damaged air cleaner body. Check the whole
clean air intake system for leaks, damage, or
loose hose clamps.
2. Service the air cleaner filter when the air cleaner
indicator (Figure
hours (more frequently in extremely dusty or
dirty conditions). Do not over service the air
filter.
1 2 3 4
7
G004501
1. Air cleaner cover
2. Air cleaner latch
3. Gasket
4. Filter
3. Be sure the cover is seated correctly and seals
with the air cleaner body.
Servicing the Air Cleaner
Service Interval: Every 400 hours
1. Pull the latch outward and rotate the air-cleaner
cover counter-clockwise
2. Remove the cover from the air-cleaner body
(Figure 49).
3. Before removing the filter, use low pressure air
(40 psi, clean and dry) to help remove large
accumulations of debris packed between outside
of primary filter and the canister.
This cleaning process prevents debris from
migrating into the intake when the primary filter
is removed.
39
49) shows red or every 400
5 6
Figure 49
5. Air cleaner body
6. Air cleaner indicator
7. Rubber outlet valve
(Figure 49).
g004501