Toro Groundsmaster 7210 Operator's Manual page 14

1. Parking brake lever
CAUTION
Do not park the traction unit on a slope.
Ignition Switch
The ignition switch has 3 positions: Off, On/Preheat,
and Start.
Throttle Lever
The throttle lever controls the speed of the engine.
Moving the throttle lever forward toward the Fast
position increases the engine speed. Moving it
rearward toward the Slow position decreases the
engine speed. The throttle controls the speed of the
blades and, in conjunction with motion control levers,
controls ground speed of the machine. Always run the
machine with the throttle in the Fast position when
cutting grass.
Power Take Off (PTO) Switch
The power take-off (PTO) switch starts and stops the
mower blades.
G020866
Figure 7
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information
about your machine such as the operating status,
various diagnostics and other information about the
machine (Figure
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen, at any time, by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
1
g020866
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to back out of any menu you are currently
using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button will be labeled with an icon displaying its
current function.
InfoCenter Icon Description
SERVICE DUE
RPM
14
8) There is a splash screen and main
2
4
3
Figure 8
3. Middle button
4. Left button
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine rpm
Hour meter
Info icon
Stationary regeneration required
g020650
g020650