Table of Contents
Advertisement
Product Overview
4
2
3
1
g014674
Figure 15
1. Engine
2. Roll bar
3. Control panel
4. Seat
Controls
Traction Pedal
The traction pedal (Figure 16) has three functions: to
make the machine move forward, to move it backward,
and to stop the machine. Press the top of the pedal to
move forward and the bottom of the pedal to move
backward or to assist in stopping when moving forward.
Also, allow the pedal to move to the neutral position to
stop the machine. For operator comfort, do not rest the
heel of your foot on reverse when operating forward
(Figure 17).
5
6
7
8
5. Steering wheel
6. Traction pedal
7. Foot rest
8. Reels with grass baskets
1
1. Traction pedal—forward
2. Taction pedal—reverse
Ground speeds are as follows:
• 2 to 5 MPH (3.2 to 8 km/h) forward mowing speed
• 10 MPH (16 km/h) maximum transport speed
• 2.5 MPH (4.0 km/h) reverse speed
Steering Arm Locking Pedal
Press the pedal (Figure 16) and raise or lower the steering
arm for operator comfort, then, release the pedal to lock
the arm in place.
Note: Move the steering arm fully forward before
lifting the seat.
Throttle Control
The throttle control (Figure 18) gives the operator the
ability to control the speed of the engine. Moving the
throttle control toward the Fast position increases the
engine RPM; moving the throttle control toward Slow
will decrease the engine RPM.
20
2
Figure 16
3. Steering arm locking pedal
Figure 17
3
g014603
Advertisement
Table of Contents
