Components; Checklist Of Components - Standard Version - Zirkon zahn M2 MILLING UNIT COMFORT LINE Operation And Maintenance Manual

COMPONENTS

CHECKLIST OF COMPONENTS - STANDARD VERSION

Packing list - Equipment:
M2 milling unit or M2 Dual milling unit
Equipment accessories:
Power cable
Connecting cable suction unit
RJ45 LAN cable – 3 m (for network switch)
Measurement stylus
2 fuses 6,3 A
Allen key set
Cleaning and maintenance set for spindle
Backup on USB stick
1 or 3 tool magazines (3 only for the M2 Dual Wet Heavy Metal, M2 Dual Teleskoper and M2
Dual Double Teleskoper milling units)
2 Cleaning Buckets
Cleaning Kit
3 clamping nuts (RA10, RA14, BR16)
If one of the components listed above is not contained in the supply, immediately contact your
Zirkonzahn partner.
ZIRKONZAHN – OPERATION AND MAINTENANCE M2 MILLING UNIT COMFORT LINE – VERSION: 19/05/2021
CHAPTER
COMPONENTS
23