Printed Circuit Boards Exchange; Front Plate Exchange; Long-Term Shutdown; Disposal - Zirkon zahn M2 MILLING UNIT COMFORT LINE Operation And Maintenance Manual

CHAPTER
REPAIRS AND TROUBLESHOOTING

PRINTED CIRCUIT BOARDS EXCHANGE

Zirkonzahn.

FRONT PLATE EXCHANGE

Replacement must be carried out only under the supervision of Zirkonzahn.

LONG-TERM SHUTDOWN

If the machine is to be shut down for a long period of time, it must be ensured that: authorised by
Zirkonzahn
- The coolant is drained.
- The milling unit is cleaned.
- The compressed air supply is removed.
the technical data sheet.

DISPOSAL

In case of dismantling, proceed in the reverse order of the equipment set-up. Follow the same
safety procedures (see "First start-up" and "Operation").
The milling unit contains various electronic and electrical components which must be disposed
of in accordance with the legal regulations of the respective country. Under no circumstances the
device must be disposed of it in the environment or in normal garbage.
54
ZIRKONZAHN – OPERATION AND MAINTENANCE M2 MILLING UNIT COMFORT LINE – VERSION: 19/05/2021