Pictograms On The Titanium Spectral-Colouring Anodizer; Checklist Of Components - Standard Version - Zirkon zahn titanium spectral-colouring anodizer Operator And Maintenance Manual

CHAPTER

PICTOGRAMS ON THE TITANIUM SPECTRAL-COLOURING ANODIZER

The symbols (indications) listed below are attached to the device and serve to indicate uncertain
and dangerous situations. The symbols have to be kept clean and have to be immediately
exchanged, if they detach or if they are damaged.
Please read this Operator's and Maintenance Manual very carefully before using
the device for the first time.
If symbols or pictograms (hazard and behaviour information) on the device are not recognisable
anymore or if they came off, the operator has to replace them immediately.

CHECKLIST OF COMPONENTS - STANDARD VERSION

Packing list - Device:
Titanium Spectral-Colouring Anodizer
Conductor set for Anodizer
Clamp for Anodizer 03-Grab
Anodizing Powder 50 g
Etching Powder 50 g
Power cable 3 m
If one of the components listed above is not contained in the supply, immediately contact your
Zirkonzahn partner.
07 07