Technical Data Of The M2 Dual Milling Unit - Zirkon zahn M2 MILLING UNIT COMFORT LINE Operation And Maintenance Manual

CHAPTER
TECHNICAL DATA
- Block diameter
- Compressed air connection
- Average air consumption
- Stand-by operation
- Operation during milling cycle
- Illumination of the device
- Protection class

TECHNICAL DATA OF THE M2 DUAL MILLING UNIT

- Processing axes
- Overall height milling unit
- Depth milling unit
- Width milling unit
- Weight milling unit
- Glass cladding Hardened Sicurit glass UNI ISO 12150
- Width Cleaning Kit
- Electrical power
- Operating voltage
- Frequency
- Mains fuse
- Overvoltage category
- Degree of contamination
- Control voltage
- Stepper motor
-
- Chuck
- Direction of spindle rotation
- Spindle motor
- Block diameter
- Compressed air connection
- Average air consumption
60
Standard Ø 95 mm; with Blank Repositioner Orbit
up to Ø 125 mm
min. 6 bar, max. 10 bar
120 l/min
90 W
400 W
> 250 lux
IP20 according to IEC/EN 60529
5
690 mm
620 mm
1250 mm
240 kg
140 mm
600 W
100 - 240 V
50 - 60 Hz
6.3 A (fast) (6.3 x 32 mm)
II
2
48 V
48 V
Ø 6 mm
Clockwise
200 W
Standard Ø 95 mm; with Blank Repositioner Orbit
up to Ø 125 mm
min. 6 bar, max. 10 bar
120 l/min
ZIRKONZAHN – OPERATION AND MAINTENANCE M2 MILLING UNIT COMFORT LINE – VERSION: 19/05/2021