First Start-Up - Zirkon zahn M2 MILLING UNIT COMFORT LINE Operation And Maintenance Manual

CHAPTER

FIRST START-UP

23
FIRST START-UP
01. Visual inspection of the device.
02. Open the device by opening the front plate.
03. Deactivate the emergency shutdown switch by turning it.
04. Turn on the main switch (now turns green) and close the front plate.
If the main switch does not light up in a green colour, check the power supply.
05. To guarantee the correctness of the parameters and the precision of the milling results,
calibrate the milling unit according to the enclosed maintenance plan after delivery or
installation.
06. The milling unit is now ready for operation.
44
Deactivate the suction unit in the Zirkonzahn.Fräsen
software.
After use, put the suction hose back into the holder.
ZIRKONZAHN – OPERATION AND MAINTENANCE M2 MILLING UNIT COMFORT LINE – VERSION: 19/05/2021