Zirkon zahn M2 MILLING UNIT COMFORT LINE Operation And Maintenance Manual page 20

CHAPTER
SAFETY AND RESIDUAL RISKS
Heated workpieces and tools.
Possible sparking when used
improperly.
Increased noise emissions.
20
For some jobs and/or materials, higher
temperatures can be reached during
elaboration. This must be taken into
account when removing the workpiece or
changing the elaboration tools. The wearing
of protective gloves is recommended.
When milling workpieces made of titanium
or other light metals, the milling unit must
not be operated unattended.
extinguisher is kept ready in the vicinity
If increased noise emissions are noticed at
the workplace, ear protection must be worn.
ZIRKONZAHN – OPERATION AND MAINTENANCE M2 MILLING UNIT COMFORT LINE – VERSION: 19/05/2021