Zirkon zahn M2 MILLING UNIT COMFORT LINE Operation And Maintenance Manual page 43

19
2o
21
22
ZIRKONZAHN – OPERATION AND MAINTENANCE M2 MILLING UNIT COMFORT LINE – VERSION: 19/05/2021
The milling unit can now be cleaned. To do so, squeeze
the lever on the back of the shower head.
After use, put the shower back in its holder, deactivate
the water pump in the Zirkonzahn.Fräsen software and
turn the tap to "OFF".
Pull the black hose out of the holder on the Cleaning Kit.
In order to activate the suction unit, it must be activated
in the Zirkonzahn.Fräsen software.
1. "More"
2. "Go to"
3. "Cleaning Positions"
4. "Vacuum Cleaner On/Off"
CHAPTER
FIRST START-UP
43