Compressed Air Connection; Environmental Conditions; Permissible Transport And Storage Conditions - Zirkon zahn M2 MILLING UNIT COMFORT LINE Operation And Maintenance Manual

- Stand-by operation
- Operation during milling cycle
- Illumination of the device
- Protection class
COMPRESSED AIR REQUIREMENTS
- Maximal dew point temperatur Dpt + 3 °C in case of atmospheric pressure: Class 4 (according
to ISO 8573-1:2010).
-
-
-
separator.
- Recommendation: To protect the compressor, it should have a tank volume of at least 50 l and
CONNECTION TO THE POWER SUPPLY SYSTEM VIA RESIDUAL-CURRENT CIRCUIT BREAKER
-
standard 2014/30 EC.
-
- Provide a suitable alternative protective measure.
- Permissible residual-current circuit breakers, Type A or B (30 mA).
- The use of residual-current circuit breakers, Type AC, is prohibited!
-
power connection, not of the machine.
ENVIRONMENT AND STORAGE CONDITIONS
- Degree of contamination according to IEC 61010-1:2.
- Up to 2000 m above sea level.
- Ambient temperature, in the range from 15 °C to 30 °C.
- Do not expose to direct solar radiation.
- Maximum relative air humidity of 75% at 30 °C;
- Do not place it near an air conditioner. Avoid cold draughts.
ZIRKONZAHN – OPERATION AND MAINTENANCE M2 MILLING UNIT COMFORT LINE – VERSION: 19/05/2021
90 W
400 W
> 250 lux
IP20 according to IEC/EN 60529
: Class 2 (according to ISO 8573-1:2010).
3
CHAPTER
TECHNICAL DATA
61