Table of Contents
Advertisement
Chapter 4
Software Utilities
The motherboard comes with helpful supporting software utilities CD-ROM
that contains software utilities to promote performance. This chapter introduces
the detail installation procedures.
Starting Installation
To run each feature, simply click on the wanted software item in the main
menu.
LANDesk Client Manager
(manufacturing option)
The LDCM software must be installed to use the hardware manager. It is used
for remote management over network and is of no use to non-networked
systems.
Three Options of LDCM Setup
LDCM Local Setup: Install software to monitor the local system.
(Recommended) Settings can be auto-detected or changed. The installation of
it is straight forward. First select LDCM Local Setup in the main menu, then all
the way down to the end of the installation. Reboot the system.
LDCM Administrator Setup: Installs software to monitor PC systems on the
network within the same bridge address with Local software installed. The
installation of it is straight forward. First select LDCM Administrator Setup in
the main menu, then all the way down to the end of the installation. Reboot the
system. The administrator should install both Local and Administrator
Software. (First install Local Setup, then install Administrator Setup.)
LDCM Custom Setup: (For Experienced Users). Please read the following
information.
1.||||Choose File | New from the pull-down menu of the "Untitled" screen.
Enter a system name.
2. Make the appropriate settings on the right-hand side.
2
I
C and Network should not be modified. Currently only ATI Video cards can
be monitored by LDCM, do not select Video ATI if using other video cards.
49
Advertisement
Table of Contents
