Standard Cmos Setup; Hard Disk Configurations - FIC PA-2013 Manual

Hide thumbs Also See for PA-2013:

Table of Contents

PA-2013 Motherboard Manual

Standard CMOS Setup

The Standard CMOS Setup screen is displayed above. Each item may have one

or more option settings. The system BIOS automatically detects memory size,

thus no changes are necessary. Use the arrow keys to highlight the item and

then use the PgUp or PgDn keys to select the value you want in each item.

TYPE: Select from 1 to 45 to fill remaining fields with predefined values of

disk drives. Select User to fill the remaining fields. Select Auto to detect the

HDD type automatically.

SIZE: The hard disk size. The unit is Mega Bytes.

CYLS: The cylinder number of the hard disk.

HEAD: The read/write head number of hard disk.

PRECOMP: The cylinder number at which the disk drive changes the

write timing.

LANDZ: The cylinder number that the disk drive heads (read/write) are

seated when the disk drive is parked.

SECTOR: The sector number of each track defined on the hard disk.

MODE: Select Auto to detect the mode type automatically. If your hard

disk supports the LBA mode, select LBA or Large. However, if your hard

disk cylinder is more than 1024 and does not support the LBA function, set

at Large. Select Normal if your hard disk supporting cylinders is below

1024.

Table of Contents