Table of Contents
Advertisement
IDE Secondary Master PIO
Allows an automatic or a manual configuration of the PCI secondary IDE
hard disk (master) mode.
The options are: Auto (Default), Mode 0, Mode 1, Mode 2, Mode 3, Mode
4.
IDE Secondary Slave PIO
Allows an automatic or a manual configuration of the PCI secondary IDE
hard disk (slave) mode.
The options are: Auto (Default), Mode 0, Mode 1, Mode 2, Mode 3, Mode
4.
IDE Primary Master UDMA
Allows you to select the first PCI IDE channel of the first master hard disk
mode or to detect it by the BIOS if the hard disk supports UDMA (Ultra
DMA, faster than DMA).
The options are: Auto (Default), Disabled.
IDE Primary Slave UDMA
Allows you to select the first PCI IDE channel of the first slave hard disk
mode or to detect it by the BIOS if the hard disk supports UDMA (Ultra
DMA, faster than DMA).
The options are: Auto (Default), Disabled.
IDE Secondary Master UDMA
Allows you to select the second PCI IDE channel of the secondary master
hard disk mode or to detect it by the BIOS if the hard disk supports UDMA
(Ultra DMA, faster than DMA). The options are: Auto (Default), Disabled.
IDE Secondary Slave UDMA
Allows you to select the second PCI IDE channel of the secondary slave
hard disk mode or to detect it by the BIOS if the hard disk supports UDMA
(Ultra DMA, faster than DMA). The options are: Auto (Default), Disabled.
HDD S.M.A.R.T. Capability
"S.M.A.R.T" is the abbrevation of "Self-Mointoring, Analysis and
Reproting Technology". To enable it will assist you in preventing some (but
not all) system down time due to hard disk drive failure. The harddisk must
be S.M.A.R.T-comptiblel in order to use this feature.
The options are: Enabled, Disabled (Default).
BIOS Setup
45
Advertisement
Table of Contents
