Table of Contents
Advertisement
PCI Configuration Setup
PCI IRQ Actived By
If your IDE card is triggered by edge, set it at Edge.
The options are: Level (Default), Edge.
PCI IDE 2nd Channel
When enabled, allows you to use the second channel of PCI IDE.
The options are: Enabled (Default), Disabled.
PCI IDE IRQ Map To
Set to Auto to allow the system BIOS to automatically detect which
interrupt is used by the PCI master drive.
The options are: PCI-AUTO (Default), PCI-SLOT1, PCI-SLOT2, PCI-
SLOT3, PCI-SLOT4, ISA.
CPU to PCI Write Buffer
When enabled, allows data and address access to the internal buffer of
82C586 so the processor can be released from the waiting state.
The options are: Enabled (Default), Disabled.
PCI Dynamic Bursting
When enabled, the PCI controller allows Bursting PCI transfer if the
consecutive PCI cycles come with the address falling in same 1KB space.
This improves the PCI bus throughput.
The options are: Enabled (Default), Disabled.
Award BIOS Setup
61
Advertisement
Table of Contents
