Table of Contents
Advertisement
Typematic Rate Setting
The term typematic means that when a keyboard key is held down, the
character is repeatedly entered until the key is released.
The options are: Disabled (Default), Enabled.
Typematic Rate (Chars/Sec)
This feature is available only if the above item, Typematic Rate Setting, is
set at Enabled. Sets the rate of a character repeat when the key is held
down.
The options are: 6 (Default), 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
This feature is available only if the item, Typematic Rate Setting, is set at
Enabled. Sets the delay time before a character is repeated.
The options are: 250 (Default), 500, 750, 1000 millisecond.
Security Option
Allows you to set the security level of the system.
The options are: Setup (Default), System.
OS Select For DRAM > 64MB
If your operating system (OS) is OS/2, select the option OS2. Otherwise,
stay with the default setting Non-OS2.
The options are: Non-OS2 (Default), OS2.
Video BIOS Shadow
Allows the BIOS to copy the video ROM code of the add-on video card to
the system memory for faster access.
The options are: Enabled (Default), Disabled.
C8000-CBFFF to DC000-DFFFF Shadow
Allows the BIOS to copy the BIOS ROM code of the add-on card to system
memory for faster access. It may improve the performance of the add-on
card.
Some add-on cards will not function properly if its BIOS ROM code is
shadowed. To use these options correctly, you need to know the memory
address range used by the BIOS ROM of each add-on card.
The options are: Enabled, Disabled (Default).
BIOS Setup
31
Advertisement
Table of Contents
