PA-2013 Motherboard Manual
Install and Remove DIMMs
This motherboard supports 100MHz SDRAM DIMMs; that is, the system
frequency of this motherboard runs in a higher speed rather than the speed of
66MHz.
Complete the following procedures to install DIMMs:
1. Locate the DIMM slots on the motherboard. (See figure below.)
2. Install the DIMM straight down into the DIMM slot with both hands.
3. The clips of the slot will close up to hold the DIMM in place when the
DIMM touches the slot' s bottom.
Press the clips with both hands to remove the DIMM.
12