Icom IC-M510BB Instruction Manual page 43

D Sending a Position Reply call
Send a Position Reply call when a Position Request call is received.
If the Auto ACK function is set to "Auto," the Acknowledgment is automatically sent to the
calling station. (p. 44)
1. After a Position Request is being received,
push
• The received call's information is displayed.
2. Push the Software Key below the intended
operation.
Ignores the call and returns to the
:
operating screen.
• The call is saved in the DSC Log.
• "
you display the call message.
Holds the RX call task, and
:
returns to the Main screen.
Sends Acknowledgment "Able to
:
comply" right away.
( Able to
• The call is saved in the DSC Log.
Comply)
• Displays the Acknowledgment
information, and then returns to
the operating screen by pushing
Sends an Acknowledgment
:
"Unable to Comply."
(Unable to
• The call is saved in the DSC Log.
Comply)
• Displays the Acknowledgment
information, and then returns to
the operating screen by pushing
DIGITAL SELECTIVE CALLING (DSC)
to turn OFF the alarm.
" blinks continuously until
, and then .
, and then .
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
30