Table of Contents
Advertisement
7
DIGITAL SELECTIVE CALLING (DSC)
D Sending an All Ships call
All Ships that have DSC transceiver use Channel 70 as their listening channel. When you
want to announce a message to these ships, if they are within range, use the All Ships
call.
1.
Push
• The "COMPOSE OTHER" screen is displayed.
L You can also display the screen by selecting
the "Compose Other" item on the Menu
screen.
2.
Select "Type," and then push [ENT] or [DIAL].
• The "MESSAGE TYPE" screen is displayed.
3.
Select "All Ships Call," and then push [ENT] or
[DIAL].
• Returns to the previous screen.
4.
Select "Category," and then push [ENT] or [DIAL].
• The "CATEGORY" screen is displayed.
5.
Select a category of the call, and the push
[ENT] or [DIAL].
• Returns to the previous screen.
6.
Select "Channel," and then push [ENT] or [DIAL].
7.
Select the channel to assign, and then push [ENT] or [DIAL].
L The assigned channels are preset by default.
8.
Push
• "Transmitting All Ships Call" is displayed, and
then the assigned channel is automatically
selected.
L If Channel 70 is busy, the transceiver stands
by until the channel becomes clear.
9.
Hold down [PTT] to communicate.
10. Push
• "Terminate the procedure. Are you sure?" is
displayed.
11. Push
• Returns to the operating screen.
25
.
to send the All Ships call.
to finish the All Ships call.
to return to the operating screen.
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-M510BB and is the answer not in the manual?
Questions and answers