Table of Contents
Advertisement
7
DIGITAL SELECTIVE CALLING (DSC)
D Allowing controllers to perform DSC operations
Select whether or not to allow controllers to perform DSC operations.
1.
Open the "DSC OPERATION" screen.
[MENU] > Settings > Configuration > Controller > DSC Operation
L Only controllers connected to the transceiver
are listed.
L The controller being operated has "(Own)"
appended to its name.
2.
Push [▲] or [▼], or rotate [DIAL] to select a
controller.
3.
Push [ENT] or [DIAL] to select ON or OFF.
ON:
Accepts DSC remote control from the controllers.
Even when this item is set to "ON," DSC remote control from the
Non-Priority Controllers is accepted only from the first controller operated.
OFF:
Refuses DSC remote control from the controllers.
Except for sending a distress call, DSC remote control from the Non-Priority
Controllers with this item set to "OFF" is not allowed.
4.
Push
51
to exit the Menu screen.
Advertisement
Table of Contents
Need help?
Do you have a question about the IC-M510BB and is the answer not in the manual?
Questions and answers