Table of Contents
Advertisement
4
BASIC OPERATIONS
■ Receiving and transmitting
CAUTION: DO NOT transmit without an antenna.
1.
Push [▲] or [▼], or push [DIAL] one or more times and rotate [DIAL] to select a
channel to call on.
• The channel number and name are briefly displayed.
is displayed while receiving a signal.
L
2.
Hold down [PTT] and speak into the microphone at your normal voice level.
•
is displayed while transmitting.
3.
Release [PTT] to receive.
2. Hold down to transmit.
3. Release to receive.
TIP: To maximize the readability of your transmitted signal, pause for a second after
holding down [PTT] and hold the microphone 5 to 10 cm from your mouth, and then
speak at your normal voice level.
NOTE: The Time-out Timer function cuts OFF transmission after 5 minutes of
continuously transmitting, to prevent prolonged transmission.
13
2. Speak to the
Microphone.
1. Select a channel.
Advertisement
Table of Contents
