Table of Contents
Advertisement
7
DIGITAL SELECTIVE CALLING (DSC)
D Receiving a Distress Relay call
When a Distress Relay call is received:
• An alarm sounds.
• The following screen is displayed and the backlight blinks.
• "
" blinks.
1.
Push
2.
Push the Software Key below the next
operation.
:
:
:
:
3.
Push
screen.
35
.
Returns to the operating screen.
The call is saved in the DSC Log.
"
" blinks continuously until you
display the call message.
Holds the RX call task, and
returns to the Main screen.
is not displayed if the
"CH Auto Switch" item is set to
"Manual." (p. 44)
Pauses the countdown until the
assigned channel is automatically
selected.
The call is saved in the DSC Log.
Accepts the call. Channel 16 is
automatically selected. Monitor
Channel 16 as a coast station
may require assistance. After
Channel 16 is selected, select
your next operation by pushing
the Software Key below the
following options.
:
Returns to the
operating screen.
:
Displays the
"DISTRESS HISTORY"
screen.
, and then
to return to the operating
Advertisement
Table of Contents
