Scl Control Block - ABB SPA-ZC 402 Installation And Commissioning Manual

SPA-ZC 402
Table 7.4.-3 Additional MMS services for SCL.2 and SCL.3
SCL conformance
MMS Services
GetCapabilityList
GetDomainAttributes
LoadDomain
StoreDomain
a. Must be m if support SCL.3 is declared.
b. Must be m if support for remote creation of a SCL is declared.
7.5.
Table 7.5.-1 Definition of SCL control block
IEC 61850-8-1 MMS
Component Name TypeDescription
validate VISIBLE-STRING
size of 64 octets
valState Unsigned Integer -
8 bits
activate VISIBLE-STRING
size of 64 octets
100
SPA/ Ethernet Adapter
Installation and Commissioning Manual
The additional MMS services, defined table below, must be supported if support for
SCL.2 or SCL.3 is declared.
Client-CR
Base F/S
O
O
O
O

SCL control block

The SCL control block must have a functional constraint of SC. This control block
must occur in LLN0 only.
The SCL control block must be a structured MMS type definition that contains the
ordered named components defined in the table below.
r/w
r
w
r
r
w
Value/Range
i
o
a
b
m/o Comments
m Must be m if support for remote
o activation of an SCL is declared.
m (0) - NOT-VALIDATED
(1) - VALIDATION-ERROR
(2) - VALIDATED
(3) - VALIDATION-IN-
PROGRESS
(4) - NOT-SUPPORTED
(5) - VALIDATE-FILE-PRESENT
m Must be m if support for remote
o activation of an SCL is declared.
1MRS755380
Server-CR
Base F/S SPA-ZC 402/
Comments
Not Supported
o i Not Supported
o m Not Supported
o Not Supported
a
o Not Supported
b
SPA-ZC 402/
Comments
N/A for TP client
N/A for TP client
N/A for TP client