Call Progress Tones Section - Cisco Small Business Pro SPA3102 Administration Manual

ATA Voice Field Reference
Regional page
ATA Administration Guide
Voice tab > Regional page >

Call Progress Tones section

Dial Tone
Second Dial Tone
Outside Dial Tone
Prompt Tone
Busy Tone
Reorder Tone
Off Hook Warning
Tone
Ring Back Tone
Prompts the user to enter a phone number. Reorder Tone is
played automatically when
alternatives times out.
The default is 350@-19,440@-19;10(*/0/1+2).
Alternative to the Dial Tone when the user dials a three-way
call.
The default is 420@-19,520@-19;10(*/0/1+2).
Alternative to the Dial Tone. It prompts the user to enter an
external phone number, as opposed to an internal
extension. It is triggered by a, (comma) character
encountered in the dial plan.
The default is 420@-19;10(*/0/1).
Prompts the user to enter a call forwarding phone number.
The default is 520@-19,620@-19;10(*/0/1+2).
Played when a 486 RSC is received for an outbound call.
The default is 480@-19,620@-19;10(.5/.5/1+2).
Played when an outbound call has failed or after the far end
hangs up during an established call. Reorder Tone is played
Dial Tone
automatically when
out.
The default is 480@-19,620@-19;10(.25/.25/1+2).
Played when the caller has not properly placed the
handset on the cradle. Off Hook Warning Tone is played
when Reorder Tone times out.
The default is 480@10,620@0;10(.125/.125/1+2).
Played during an outbound call when the far end is ringing.
The default is 440@-19,480@-19;*(2/4/1+2).
Dial Tone or any of its
or any of its alternatives times
B
146