Call Feature Settings Section - Cisco Small Business Pro SPA3102 Administration Manual

ATA Voice Field Reference
Line page
ATA Administration Guide
Use Anonymous
with RPID
Use Local Addr in
FROM
Voice tab > Line page >

Call Feature Settings section

Blind Attn-Xfer
Enable
MOH Server
Conference Bridge
URL
Conference Bridge
Ports
When set to yes, use "anonymous" in the SIP message
when remote party ID is requested in the SIP message.
This field is found on the SPA2102 only.
Default is yes.
The IP address of the local address enclosed in the FROM
of the SIP message. This field is found on the SPA2102
only.
Default is no.
Enables the ATA device to perform an attended transfer
operation by ending the current call leg and performing a
blind transfer of the other call leg. If this feature is disabled,
the ATA device performs an attended transfer operation by
referring the other call leg to the current call leg while
maintaining both call legs. To use this feature, select yes.
Otherwise, select no.
The default is no.
User ID or URL of the auto-answering streaming audio
server. When only a user ID is specified, the current or
outbound proxy is contacted. Music-on-hold is disabled if
the MOH Server is not specified.
This feature supports external conference bridging for n-
way conference calls (n > 2), instead of mixing audio locally.
To use this feature, set this parameter to that of the server's
name, for example, conf@myserver.com:12345 or conf
(which uses the Proxy value as the domain). This field is
found on the SPA2102 and PAP2T only.
Select the maximum number of conference call
participants. The range is 3 to 10. The default is 3. This field
is found on the SPA2102 and PAP2T only.
B
172