Table of Contents
Advertisement
ATA Voice Field Reference
Trunk Group page (SPA8000)
ATA Administration Guide
SIP Port
SIP 100REL Enable To enable the support of 100REL SIP extension for reliable
Auth Resync-
Reboot
SIP Proxy-Require
SIP Remote-Party-
ID
SIP GUID
Port number of the SIP message listening and transmission
port.
The default is 5060.
transmission of provisional responses (18x) and use of
PRACK requests, select yes. Otherwise, select no.
The default is no.
If this feature is enabled, the ATA device authenticates the
sender when it receives the NOTIFY resync reboot (RFC
2617) message. To use this feature, select yes. Otherwise,
select no.
The default is yes.
The SIP proxy can support a specific extension or behavior
when it sees this header from the user agent. If this field is
configured and the proxy does not support it, it responds
with the message, unsupported. Enter the appropriate
header in the field provided.
To use the Remote-Party-ID header instead of the From
header, select yes. Otherwise, select no.
The default is yes.
This field is not found in the PAP2T.
The Global Unique ID is generated for each line for each
device. When it is enabled, the ATA device adds a GUID
header in the SIP request. The GUID is generated the first
time the unit boots up and stays with the unit through
rebooting and even factory reset. This feature was
requested by Bell Canada (Nortel) to limit the registration of
SIP accounts.
The default is yes.
B
183
Advertisement
Table of Contents
